The two ends of a metal rod are matainted at temperatures 100°C and 110°C. The rate of heat flow in the rod is found to be 4.0 J/s. If the ends are maintained at temperatures 200°C and 210°C, the rate of heat flow will be :
The electeric field in a certain region is acting radially outward and is given by E = Ar.A charge contained in a shepere of radius 'a' centred at the origin of the field, will be given by :
Three identical spherical shells, each of mass m and radius r are placed as shown in figure. Consider an axis XX' which is touching to two shells and passing through diameter of third shell. Moment of inertia of the system consisting of these three spherical shells about XX' axis is :-
A, B and C are voltmeters of resistance R, 1.5 R and 3R respectively as shown in the figure. When some potential difference is applied between X and Y, the voltmeter readings are VA, VB and V respectively. Then :
Three blocks A, B and C of masses 4 kg, 2 kg and 1 kg respectively, are in contact on a frictionless surface, as shown. If a force of 14 N is applied onthe 4 kg block, then the contact force between A and B is :
If in a p-n junction, a square input signal of 10 V is applied as shown,
.JPG)