It deals with job simplification in an industry.
Which one of the following is a variable cost ?
In a modern mill, what is the units consumed by ring frame for producing 100 kg of 40 Ne yarn ?
To calculate the cost/kg of yarn, which equation is used to calculate the raw material cost ?
Where C = fibre cost/kg
g = yarn realization
P = Price realised for wastes/kg of fibre
The minimum number of fibres required for a yarn cross section is
In a yarn manufacturing process, the cleaning index of a machine is defined as
Where DF = the direct content of the feed material
DD = the direct content of the delivered material.
The ratio of the fabric area covered by the yarn to the total fabric area is called
Among the following treatment process 90% of BOD of effluent can be reduced by
The fatigue resistance of cord fabric materials is high for
The pore radius of a filter by bubble point cannot be calculated using the parameter
The frictional resistance of a geo textile can be tested by
The formation of three dimensional pile on the surface of a non-woven backing is
In the following non-woven production process, very high voltage (kV) is applied for production of fibres in
For a fibre density of 0.5-1.5 (Denies) the preferred needle gauge for usage in needle punching is
It refers to the number of stock keeping units within a merchandise category, group or department.
Visual merchandising is one of the activity of
During the loop formation, when the new loop emerges through the old loop from back to the face side, it is called
The period of merchandising cycle in the merchandising process is around ...................week.
Which of the following sewing thread package is mostly used for high speed sewing machine ?
The fine edge bladed straight knife cutting machine is preferred to cut
Which of the following fabric spreading factor is depends on the fabric type and pattern shape ?
In bearded needle tricot knitting machine, the needle bars have...............movement.
In case of circular plain knit fabric the number of courses per design repeat indicates
The dry curing of crease proofed cloth for short duration at elevated temperature compared to 'wet curing' for long duration at low temperature results in
Sanforized fabric relates to
Freundlich isotherm is applicable to
Knitted fabrics are commonly dyed in
Match the following dye fibre combinations :
In the case of reactive dyeing of cotton, the exhaustion is 80% and the reaction efficiency is 80%. Assuming that the initial dye concentration is 2% on the weight of fabric. The amount of un-reacted dye on the fabric expressed as percentage of fabric weight would be
Batch dyeing machine
